Views: 0 Author: Site Editor Publish Time: 2026-11-20 Origin: Site
When packaging engineers specify PET strap, they typically focus on visible metrics: width, thickness, and break force. However, the true foundation of a strap's mechanical performance lies in an invisible chemical property—the intrinsic viscosity (IV) of the polyester resin. Viscosity measures the molecular weight of the polymer chains. Longer chains create stronger intermolecular bonds, delivering higher tensile strength and better creep resistance.
If you source PET strap from a manufacturer with poor viscosity control, the consequences are severe: straps that snap under tension, lose their grip during transit, or fail completely in automated machines. Conversely, if the viscosity is too high, the resin becomes too stiff to extrude and stretch efficiently, leading to manufacturing defects.
At Jushuo Packaging, our production data shows that strict viscosity control is the single most important factor separating premium PET strapping from commodity-grade alternatives. This article explains the technical significance of viscosity, why the 0.60–0.95 dl/g range is critical, and how to verify it with your supplier.
Intrinsic viscosity is a measure of a polymer's ability to flow in a solution. It is directly proportional to the molecular weight of the polymer. In the PET industry, IV is typically measured in deciliters per gram (dl/g).
Low IV: Shorter polymer chains, lower molecular weight.
High IV: Longer polymer chains, higher molecular weight.
For PET strapping, the IV is determined during the polymerization process and is heavily influenced by the use of Solid State Polymerization (SSP). SSP is a process that heats the PET chips in a vacuum to increase the molecular weight and, consequently, the viscosity.
Based on polymer science, PET resin viscosity falls into three functional zones for strapping applications:
Viscosity Zone | Value (dl/g) | Effect on Finished PET Strap |
|---|---|---|
Low | < 0.60 | Brittle, prone to splitting, low tensile strength |
Optimal | 0.60 – 0.95 | High tensile strength, excellent durability, optimal processing |
High | > 0.95 | Difficult to extrude, requires excessive energy, stiff strap |
The 0.60 to 0.95 dl/g range is the sweet spot. It provides the polymer chains sufficient length to achieve break forces up to 1,360kg, while remaining processable in high-speed extrusion and stretching lines.
Tensile strength is directly proportional to molecular weight. A PET strap made from 0.80 dl/g resin will have significantly longer polymer chains than one made from 0.60 dl/g resin. These longer chains create more entanglement points, making the strap highly resistant to breaking under tension.
This is why high-viscosity PET strap can effectively replace steel strapping in heavy-duty applications like steel coil bundling and cotton bale packaging.
Creep is the tendency of a material to deform slowly under sustained load. Low-viscosity PET creeps faster, meaning the strap will gradually stretch and loosen during long-distance transport. High-viscosity PET (0.80–0.95 dl/g) resists creep, ensuring the strap maintains constant tension over weeks or months of ocean transit.
According to polymer science data, higher viscosity PET resists UV degradation and thermal aging better than lower viscosity grades. This ensures the strap maintains its mechanical integrity even when exposed to harsh outdoor storage conditions.
If the viscosity exceeds 0.95 dl/g, the resin becomes highly viscous (thick) when melted. This requires more energy to pump through the extruder and makes the stretching process difficult to control. By keeping the IV strictly below 0.95 dl/g, manufacturers ensure a stable production process that yields consistent width and thickness tolerances.
Even if you start with high-quality PET resin (e.g., 0.80 dl/g), the manufacturing process can degrade it.
During the extrusion process, the PET resin is melted. If the resin is not properly dried before melting, moisture reacts with the polymer chains, causing hydrolysis. This breaks the molecular chains, drastically reducing the viscosity and resulting in a weak, brittle strap.
Excessive heat during extrusion can also degrade the polymer. This is why precise temperature control in the extruder is critical. At Jushuo Packaging, our advanced Italian screen changers and extrusion lines maintain precise temperature zones to prevent thermal degradation and preserve the resin's optimal viscosity.
Always ask your PET strap supplier for the raw material certificate (ISO 9001 or equivalent). This certificate should state the intrinsic viscosity of the PET resin used. A reputable supplier will provide documentation showing an IV between 0.60 and 0.95 dl/g.
Viscosity manifests in the finished product's physical properties. You can test samples for:
Break force: Does it meet the specification without being brittle?
Elongation: Is the elongation at break within the 10–18% range?
Splitting resistance: Does the strap split easily when bent or tensioned?
At Jushuo Packaging, our lab data shows that strict viscosity control between 0.60 and 0.95 dl/g is maintained across all production batches. We verify the viscosity at the raw material stage and continuously monitor extrusion temperatures to prevent hydrolysis.
The viscosity range for high-quality PET strap is 0.60 to 0.95 dl/g. Within this range, the polyester resin achieves the optimal balance of long polymer chains (for high tensile strength and creep resistance) and processability (for consistent, high-speed manufacturing).
For buyers, viscosity is the hidden specification that determines whether a PET strap will hold up in heavy-duty applications or fail prematurely. By sourcing from manufacturers with strict viscosity control and SSP technology, you ensure that your strapping meets the highest performance standards.
Jushuo Packaging stands as your trusted polyester PET strap manufacturer, delivering superior quality plastic strapping solutions backed by over a decade of specialized expertise. Our state-of-the-art 15,000㎡ manufacturing facility utilizes advanced Solid State Polymerization (SSP) technology to precisely control viscosity from 0.60 to 0.95 dl/g, producing high-performance PET strapping with 99% pass rates. With annual production capacity exceeding 20,000 tons, we ensure reliable supply chains and competitive pricing for bulk orders. If you need assistance with PET strap specifications or viscosity verification, please send an email to sales@jushuopackaging.com, and our professional team will provide one-on-one support.
ASTM International. "ASTM D4603-03 – Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate)." ASTM.org, 2021.
PAC Strapping Products. "High-Performance Polyester Strapping." Plant Engineering, 2024.
European Committee for Standardization. "EN 13394:2001 – Packaging – Strapping – Specifications for Polyester Strapping." CEN.eu, 2001.
Mite-Guzmán, N., Lazo, M., Triguero, J., et al. "Two-dimensional infrared for monitoring the structural variations of UV-aged recycled polypropylene straps used in the Ecuadorian banana industry." ScienceDirect.com, 2023.