Views: 0 Author: Site Editor Publish Time: 2026-11-11 Origin: Site
In the packaging industry, the debate between PET strap (polyester strap) and steel strapping often focuses on extremes. Steel advocates point to loads exceeding several tons; PET advocates point to the material's massive weight and safety advantages.
But for most packaging engineers and procurement managers, the real decision happens in the middle ground—specifically, loads requiring a break force between 160kg and 635kg. This range covers the vast majority of industrial palletizing, brick, timber, and general manufacturing loads.
In this specific range, PET strap does not just compete with steel—it often outperforms it. At Jushuo Packaging, our production data shows that for applications within the 160–635kg break force range, switching to PET strap consistently improves safety and reduces total packaging costs. This article examines the technical comparison within this critical strength window.
This break force range corresponds to medium to heavy-duty loads that are standard in global logistics:
Break Force | Typical PET Spec | Typical Load Application |
|---|---|---|
160–280kg | 12mm × 0.6mm | Light pallets, standard cartons |
280–450kg | 16mm × 0.8mm | Medium pallets, industrial parts |
450–635kg | 19mm × 1.0mm | Heavy pallets, bricks, timber |
Historically, loads in this range were secured using steel strapping with a width of 12mm to 19mm and a thickness of 0.4mm to 0.5mm. These steel straps offered high rigidity but introduced severe handling and safety issues.
To achieve a 450kg break force, you can use a 19mm PET strap or a comparable steel strap.
Weight: The PET strap weighs approximately one-sixth of the steel strap. This drastically reduces worker fatigue and shipping costs.
Safety: Steel strap under 450kg of tension acts like a razor blade when cut. It can cause severe lacerations and snap-back injuries. PET strap cuts safely with minimal recoil.
This is where PET strap wins decisively. Steel strapping has virtually no elasticity. Once a load settles during transit and the steel strap loosens, it stays loose. PET strap, however, has an elongation of 10–18%. When the load settles, the PET strap contracts and maintains the 160–635kg of tension, keeping the load secure.
Steel strap is resistant to edge cutting but is prone to rusting. PET strap in this range requires the use of edge protectors if the load has sharp corners. With protectors applied, a 19mm PET strap easily handles 635kg loads without splitting.
Within the 160–635kg range, PET strap is a direct, drop-in replacement for steel in most applications:
Brick and Masonry: 19mm PET strap is widely used to bundle bricks, replacing steel bands.
Timber and Lumber: PET strap's elastic memory handles the shrinkage and settling of wood better than steel.
Metal Components: For palletized metal parts that do not exceed 600kg, PET strap provides ample strength without rust contamination.
Export Pallets: The superior tension retention of PET makes it ideal for long-distance ocean transit in this weight class.
While PET dominates the 160–635kg range, it is important to know its limits. If your load:
Exceeds 1,500kg in total weight.
Has extremely sharp, unprotected edges.
Requires maximum rigidity (e.g., cold-rolled steel coils).
You may need to step up to heavier PET grades (up to 1,360kg) or revert to steel for extreme loads.
For loads requiring a break force between 160kg and 635kg, PET strap is the superior packaging material. It matches the strength of traditional steel strapping while eliminating rust, reducing weight by 80%, and providing vastly superior tension retention and worker safety.
Jushuo Packaging stands as your trusted polyester PET strap manufacturer, delivering superior quality plastic strapping solutions backed by over a decade of specialized expertise. Our state-of-the-art 15,000㎡ manufacturing facility utilizes advanced production technology to produce high-performance PET strapping with 99% pass rates. With annual production capacity exceeding 20,000 tons, we ensure reliable supply chains and competitive pricing for bulk orders. If you need assistance selecting the right PET strap to replace your steel bands, please send an email to sales@jushuopackaging.com, and our professional team will provide one-on-one support.
ASTM International. "ASTM D3950-23 – Standard Specification for Strapping, Nonmetallic (and Joining Methods)." ASTM.org, 2023.
PAC Strapping Products. "High-Performance Polyester Strapping." Plant Engineering, 2024.
Signode Industrial Group. "PET vs Steel Strapping for Heavy Industrial Loads." Signode.com, 2025.
Hacini, M., Benosman, A.S., Tani, N.K., et al. "Utilization and assessment of recycled polyethylene terephthalate strapping bands as lightweight aggregates in Eco-efficient composite mortars." Construction and Building Materials, vol. 270, 121427, 2021.