Views: 0 Author: Site Editor Publish Time: 2026-10-23 Origin: Site
In packaging operations, width is one of the most consequential decisions when specifying PP strap (polypropylene strap). Select a width that is too narrow, and the strap may fail under load or cut into cartons. Select a width that is too wide, and you pay for unnecessary material while possibly exceeding your strapping machine's capacity.
Choosing the correct width is a balance of three factors: the load being secured, the equipment being used, and the cost you want to achieve. According to industry guidelines, standard widths range from 5mm to 19mm, with each size serving a specific purpose.
At Jushuo Packaging, our production data shows that width mismatches are a common cause of feeding issues and load failures. This guide explains how to match PP strap width to your specific application requirements.
PP strap is manufactured in several standard widths. According to packaging specifications, the most common widths are 5mm, 9mm, 12mm, 15mm, and 19mm.
Width | Typical Application | Break Force Range |
|---|---|---|
5–6mm | Small cartons, light bundles | 45–60kg |
8–9mm | Medium cartons, e-commerce | 85–130kg |
11–12mm | Standard pallets, industrial | 100–175kg |
15–16mm | Heavy cartons, medium pallets | 160–225kg |
18–19mm | Heavy pallets, industrial loads | 240–355kg |
According to EN 13394 standards, PP strap width is manufactured to a tolerance of approximately ±0.1mm. This tolerance is critical for automatic strapping machines. If the width varies too much, the strap may jam in the chute or fail to seal properly.
At Jushuo Packaging, our machine-grade PP strap is produced to tight tolerances to ensure reliable feeding in automated equipment.
The weight of the package is the most important factor. A heavier load requires a wider strap to distribute the tension and prevent the strap from breaking or cutting into the package.
Load Weight | Recommended Width |
|---|---|
Under 15kg | 5–9mm |
15–35kg | 9–12mm |
35–100kg | 12–16mm |
Over 100kg | 16–19mm |
The strength of the carton matters. A thin, single-wall carton may crush under a narrow strap that concentrates force. A wider strap distributes the pressure, protecting the box.
If the carton has sharp edges or corners, a wider strap combined with edge protection is recommended.
Your strapping machine dictates the maximum and minimum width it can handle. According to equipment manufacturers:
Table-top machines: typically 5–12mm
Arch-type machines: typically 9–15.5mm
Pallet strappers: typically 12–19mm
Always check the machine manual before selecting a width.
Sometimes, using multiple narrower straps is more effective than using a single wide strap. Multiple straps provide redundancy and distribute the load more evenly. For example, two 12mm straps can secure a pallet better than one 19mm strap if positioned correctly.
For high-speed e-commerce fulfillment, 5mm to 9mm width is standard. These straps are lightweight, cost-effective, and compatible with high-speed automated machinery.
For standard cartons and boxes, 9mm to 12mm is the optimal range. It provides sufficient strength for medium loads without exceeding the capacity of standard carton-sealing machines.
For securing cartons to pallets, 12mm to 16mm is recommended. This width provides enough strength to stabilize the pallet and distribute the load across the carton surfaces.
For heavy machinery, construction materials, or dense loads, 19mm width is required. This width offers the maximum break force available for PP strap and ensures the load remains secure during transport.
Using a 5mm strap on a 50kg carton is a recipe for failure. The strap will likely break, or it will cut into the carton, damaging the goods inside.
Using a 19mm strap on a small e-commerce box is wasteful. It increases material costs and may exceed the machine's capacity, causing jams.
Using a strap width that doesn't match the machine's chute will cause feeding issues. Always verify compatibility.
Choosing the right PP strap width depends on three main factors: load weight, carton type, and machine compatibility. For light loads under 15kg, 5–9mm is sufficient. For medium loads up to 100kg, 12–16mm is recommended. For heavy loads over 100kg, 16–19mm is required. Always verify your strapping machine's width range before ordering.
Jushuo Packaging stands as your trusted polypropylene PP strap manufacturer, delivering superior quality plastic strapping solutions backed by over a decade of specialized expertise. Our state-of-the-art 15,000㎡ manufacturing facility utilizes advanced Italian screen changers and precision cold-drawing technology to produce high-performance PP strapping with 99% pass rates. With annual production capacity exceeding 20,000 tons, we ensure reliable supply chains and competitive pricing for bulk orders. If you need assistance selecting the right PP strap width for your application, please send an email to sales@jushuopackaging.com, and our professional team will provide one-on-one support.
ASTM International. "ASTM D3950 – Standard Specification for Strapping, Flat Steel and Seals." ASTM.org, 2021.
Society of Plastics Engineers. "Polypropylene: Properties and Applications." SPE.org, 2024.
Signode Industrial Group. "Dylastic Polypropylene Strapping – Technical Specifications." Signode.com, 2025.
